100 Roof Mount System
Module Attachments

Wire Management & Conduit Support Solutions

  • Universal Wire Clamp

    242-02150

  • Full Wire Management System

    100 Roof Mount and 200 Ground Mount System

  • Junction Box R

    242-01104

    100 Roof Mount & 200 Ground Mount

  • Junction Box R

    242-01104

    100 Roof Mount & 200 Ground Mount

  • Junction Box R

    242-01104

    100 Roof Mount & 200 Ground Mount

  • Trunk Cable Clamp & 4-Wire Clamp

    242-02103 & 242-02102

    100 Roof Mount & 200 Ground Mount

  • Trunk Cable Clamp & 4-Wire Clamp

    242-02103 & 242-02102

    100 Roof Mount & 200 Ground Mount

  • Snap-In Wire Retention Clip

    232-01106

    100 Roof Mount and 200 Ground Mount Systems

  • Junction Box, Wire Clamp, Wire Clip & Grounding Lug

    100 Residential Roof Mount System

  • Comp Conduit Support

    242-02106

  • Tile Conduit Support

    242-02104

  • MLPE Rail Attachment Kit

    242-92093

    100 Roof Mount System

  • Installed MLPE Rail Attachmet Kit

    100 Roof Mount System

  • Snap-In Ground Lug 6-12 AWG

    242-02101

    100 Roof Mount and 200 Ground Mount Systems

  • Lay-in Lug w/ Bolt and Keps Lock Nut, 4-14 AWG

    051-03418

    100 Roof Mount and 200 Ground Mount Systems

  • Wiley Lay-in Lug w/ WEEB and Hardware, Wiley WEEB-LUG-6.7AS

    051-04015

    100 Roof Mount and 200 Ground Mount Systems

  • Wire Management Solutions comprise a set of dedicated products to reliably and cost effectively secure PV Module and Microinverter leads in the rail channels for easy wire management and a faster installation. All products are made of materials which have been selected for their high UV exposure capability and ability to handle extreme rooftop temperatures common under solar arrays. Snap-in Grounding is a fully custom solution for grounding the completed system. The SnapNrack MLPE (Module Level Power Electronics) Rail Attachment Kit is an efficient solution for attaching Enphase microinverters and SolarEdge optimizers directly to SnapNrack rails. The MLPE Rail Attachment Kit comes pre-assembled, installs to microinverters and optimizers with a single 1/2” socket and utilizes our bonding channel nuts for Snap-In attachment to the rail. Conduit Supports for Composition Shingle and Tile Roofs Provide an intuitive method for securing conduit to the rooftop. Conduit Support Clamps provide a flashed composition support attachment to the roof with a single lag bolt.


    • NEW! Universal Wire Clamp design allows maximum versatility providing clamping space for Enphase Q Cables as well as PV Wires.
    • The SnapNrack Junction Box provides a quick and easy installation and NEMA 4x rating, to conceal and protect electrical connections
    • 4-Wire and Trunk Cable Clamps allow you to secure DC & AC wire runs in and out of the rail channels and jumping between rails
    • Wire Retention Clips allow you to quickly secure PV conductor and AC trunk lines into the existing rail channels
    • Microinverter and optimizers are bonded to the system through the MLPE Kit and it’s attachment to the rail so no need to bond optimizers with ground lugs and bare copper

    Need to Configure a System?

    Utilize the SnapNrack Configurator Tool

    Where Can I Buy this?

    Find a SnapNrack Distributor near you

    Technical Features


    Wire & Grounding Materials

    • Wire Retention Clip
      • UV-resistant polymer
    • 4-Wire Clamp
      • UV-resistant polymer
      • Aluminum and stainless steel
    • Trunk Cable Clamp
      • Polycarbonate
    • Junction Box
      • Box: Polycarbonate
      • Gasket: Rubber
    • Snap-In Ground Lug
      • Tin-Plated Aluminum
    • Wiley Weeb
      • Stainless steel and copper
    • MLPE Attachment Kit
      • Anodized aluminum channel nut
      • Stainless steel bolts and washers
    • Comp Conduit Kit
      • Flashing: Galvanized Steel
      • L Foot Base: 6000 Series Aluminum
      • 1” Spacer: 6000 Series Aluminum
      • Conduit Strap: Zinc-Plated Steel
      • Lag Screw: Stainless Steel
      • Stainless Steel Hardware
    • Tile Conduit Kit
      • Conduit Tile Hook: 6000 Series Aluminum
      • Conduit Strap: Zinc-Plated Steel
      • Hardware Stainless Steel

    Rated

    • Junction Box: Nema 4X and UL 50

    Wire & Grounding Torque Specification

    • Wire Management
      • 16 ft lbs
    • MLPE Attachment Kit
      • 10-16 ft lbs
    • SNR Ground Lug
      • 16 ft-lbs
      • Ilsco: to rail: 5 ft lbs, lug screw: 20-25 in-lbs
      • WEEBs: to rail: 10 ft-lbs, lug: 7 ft-lbs

    Certifications

    Resources

    SnapNrack Master Price List

    DC Wire Management for 100 Roof Mount Installations

    AC Trunk Cable Management for 100 Roof Mount Installations

    Junction Box Installation Manual

    Resource Archive